Clock/rimer, Sleep timer, Alarm timer setting – Philips FWR7R37 User Manual
Page 55: Clock setting, Alarm timer
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
CLOCK/riMER
ffl
3
w'
You can select different timer functions which will be activated
at a chosen time. Make sure the clock is set before using one
of these features.
Clock setting
Manual clock setting
1 Press (!) STANDBY ON as often as necessary on the unit to
switch the unit to standby.
2 Press CLOCK/TIMER on the unit.
3 Rotate JOG CONTROL to select the clock.
-►Clock is displayed and © starts blinking.
4 Press YES to confirm the selection.
-►The day of the week digit blinks.
5 Rotate JOG CONTROL to set the day.
6 Use « SEARCH or» SEARCH on the unit to move
from day of the week to hour.
7 Rotate JOG CONTROL to set the hour.
8
Repeat steps 6 and 7 to set the minutes.
9 Press YES to confirm the settings.
[sleep timer
You can set a certain period of time before the unit switches off.
1 Press SLEEP on the remote control until the desired sleeper
time is displayed.
-► SLEEP
is shown and
Sleep 60 minj 45 mirij
30
min, 15 min
is displayed or,
Sleep OFF
is
displayed.
2 As soon as the desired time is displayed, do not press
SLEEP again.
-►After the chosen time has elapsed, the unit switches to
standby.
• To deactivate the sleep timer, press SLEEP on the remote
control until
Sleep
OFF is displayed.
Alarm timer
Alarm timer setting
The unit can be used as an alarm clock, whereby the tuner,
CD recorder or CD changer starts playback automatically at a
preset time.
1 Press (!) STANDBY ON as often as necessary on the unit to
switch the unit to standby.
2 Press CLOCK/TIMER on the unit.
3 Rotate JOG CONTROL to select the alarm timer.
-►RLarm
is displayed,
alarm
is blinking.
4 Press YES to confirm the selection.
-►The hour digit is blinking.
5 Rotate JOG CONTROL to set the hour.
6 Use « SEARCH or» SEARCH on the unit to move
from hour to minutes.
7 Rotate JOG CONTROL to set the minutes.
8
Press YES to confirm the time settings.
9 Rotate JOG CONTROL to select the source you want to be
woken up with.
10 Press YES on the unit to confirm the source selection.
• To stop the alarm, press (!) STANDBY ON on the unit.
28