Philips FWR7R37 - Manual (Page 29)

BASIC FUNCTIONS
Sound control
Volume adjustment
• Adjust the volume by using MASTER VOLUME
( — VOLUME/ + on the remote control).
-►The volume level in dB (decibel) is displayed.
DSC
Digital Sound Control enables you to select different preset
sound settings.
• Press DSC repeatedly to select the desired sound
characteristics.
—►Optimal, Jazz, Classic, Rock, Uocal, Techno.
Incredible Surround
Stereo sound is determined by the distance between the front
speakers. Incredible Surround enables you to enjoy an incredibly
wide stereo effect, regardless of the speakers' distance.
• Press INCREDIBLE SURROUND (INCREDIBLE SURROUND on
the remote control) to switch the surround sound effect
either on or off.
-►INCREDIBLE SURROUND is showp and Incredible
Surround is displayed if the surround sound effect is on.
Note: The effect of Incredible Surround may vary with different
types of music.
MUTE
This feature allows you to temporarily switch off the sound
without switching off the unit.
1 Press MUTE on the remote control to switch off the sound.
-►Mute is displayed and playback/recording will be
continued without sound.
2 Press MUTE on the remote control again to switch on the
sound again.
Speaker balance
It is possible to adjust the relative volume balance between
the connected front speakers.
• Press L BALANCE or R BALANCE on the remote control to
adjust the relative volume of the left or right front speaker.
-►B-a Lance L (or R) and the actual volume of the left
(or right) front speaker are displayed.
-►When the volume of both speakers is balanced,
BaLance L=R is displayed.
|Demo mode * •
The demo mode displays various features of the unit and will
start automatically.
• If any source key Is pressed:
-►The unit switches to the selected source.
IfO STANDBY ON Is pressed:
-►The unit switches to standby. After a few seconds, the
demonstration will start again.
Cancelling the demo mode
• Keep STOP □ on the unit pressed for at least 3 seconds to
cancel the demo mode.
-►The demo mode is cancelled permanently. The unit
switches to standby. A few seconds later the unit
switches to an economy power save mode.
.¡2
PURE
• Press PURE repeatedly to switch the DSC settings either on
or off.
-►PURE is shown and Pure is displayed if the DSC settings
are switched off.
LOUDNESS
• Press LOUDNESS to switch loudness either on or off.
-►LOUDNESS is shown and Loudness is displayed if
loudness is on.
15