Philips FWR7R37 - Manual (Page 39)

INTERNAL RECORDING
m
s
(gj
w‘
High speed recording
High speed recording of an entire disc, a track, a
program or a track edit
1 Make sure the CDR(W) is absolutely free of scratches and
dust particles.
2 Press either CD 1, CD 2 or CD 3 to select the disc from
which you wish to record.
3 Press REC TYPE on the unit to enter into the recording menu.
4 Rotate JOG CONTROL to select one of the following high
speed recording modes:
If a disc from the CD changer is selected:
-►CD Fast,?: for high speed recording of an entire disc
• Continue with step 5.
-►Track Fast?: for high speed recording of a track
• Press YES to confirm.
• Rotate JOG CONTROL to select the track.
-►Rec Tr and the track number is displayed.
• Continue with step 6.
If CD changer program mode is available:
-►Prog Fast?: for high speed recording of the selected
disc or of the program
If CD changer track edit mode is available:
-►fl-B Fast?: for high speed recording of the A-B track
5 Press YES to confirm your selection.
-►Both decks will be selected in the display, the arrow
starts blinking. The remaining recording time of the
CDR(W), the total recording time of the CDR(W) and
either Record CDl (or 2, 3)?, Record Prog? or
Record fl-B? is displayed.
Note: When the CDFI(W) already contains a recording, ALC
will also become active and alc will be shown.
6 Press YES to start high speed recording.
-►The arrow lights,
recording in progress
is shown, high
speed recording starts and the actual recording time
remaining starts to count down.
• To stop recording, press STOP □ on the unit.
Normal recording and listening
Normal recording and listening of an entire disc, a
track, a program or a track edit
1 Make sure the CDR(W) is absolutely free of scratches and
dust particles.
2 Follow steps 2 and 3 of "High speed recording".
3 Rotate JOG CONTROL to select one of the following normal
record options:
If CD changer is selected:
-►CD Listen?: for listening to the entire disc during
normal recording
-►Tr-ackListen?: for listening to the track during
normal recording
• Press YES to confirm.
• Rotate JOG CONTROL to select the desired track.
-►Rec Tr and the track number is displayed.
• Continue with step 6 of "High speed recording".
If CD changer program mode is available:
-►Prog Listen?: for listening to the program during
normal recording
If CD changer track edit mode is available:
-►fl-B Listen?: for listening to the A-B track during
normal recording
4 Follow steps 5 and 6 of "High speed recording".
• To stop recording, press STOP □ on the unit.
DO NOT FORGET TO FINALIZE!
: Finalizing a CDR(W) disc is a simple procedure, necessary to:
- play a recorded CDR on a standard CD player or
- play a recorded CDRW on a CDRW compatible CD player
and CD recorder.
20