Esc = n – Citizen Systems CBM-270 User Manual
Page 55
CBM-270 User’s Manual
[Range]
0
≤
n
≤
255
[Outline]
The line feed rate per line is specified by n/360 inch.
Since an actual mechanical pitch is 1/203 inch, it is internally converted approximate to the
value specified with this command.
[Default]
•
The initial value is n = 60 (1/6 inch) (18H), being 4.23 mm line feed rate.
[Sample Program]
[Print Results]
See Sample Program and Print Results for ESC 2 on Page 54.
ESC = n
[Function]
Data input control
[Code]
<1B> H <3D> H
[Range]
0
≤
n
≤
255
[Outline]
Selecting equipment in which data input from the host is effective.
•
Each bit of n indicates as follows:
Value
Bit
Equipment
0
1
0
Printer
Invalid
Valid
1
Not defined
2
Not defined
3
Not defined
4
Not defined
5
Not defined
6
Not defined
7
Not defined
•
When the printer has not been selected, this printer abandons all the received data until it
is selected by this command.
[Caution]
•
Even when the printer has not been selected, it can become BUSY state through printer
operation.
•
When the printer is deselected, this printer discards all the data until it is selected with this
command.
[Default]
n = 1
[Sample Program]
[Print Results]
LPRINT "AAAAA" ;
LPRINT CHR$ (&H1B) ; "=" ; CHR$ (0) ;
LPRINT "aaaaa" ; CHR$ (&HA) ;
LPRINT CHR$ (&H1B) ; "=" ; CHR$ (1) ;
LPRINT "AAAAA" ; CHR$ (&HA) ;