Citizen Systems CBM-270 - Manual (Page 48)

CBM-270 User’s Manual
CR
[Function] Print
[Code] <0D>H
[Outline] 1) When DS1-2 is OFF:
This command is ignored.
2) When DS1-2 is ON:
With data held inside the internal print buffer, printing and line feed are performed.
W it hout da t a inside the i nte rna l pr i nt buff er , howe ve r, no pr inti ng is pe rf orm ed.
[See Also] LF
[Sample Program] [Print Results]
LPRINT "AAA" ; CHR$ (&HD) ; When DS1-2 is OFF
LPRINT "BBB" ; CHR$ (&HD) ;
LPRINT CHR$ (&HD) ;
LPRINT "CCC" ; CHR$ (&HD) ; When DS1-2 is ON
END
ESC SP n
[Function] Setting the right spacing of the character
[Code] <1B> H <20> H
[Range] 0
≤
n
≤
32
[Outline] The rightward space amount is set in dot unit (1/203 inch unit). In the initial value, it is n=0.
[Caution] The rightward space amount in double wide mode is made double of the set volume.
[Default] n = 0
[Sample Program] [Print Results]
LPRINT CHR$ (&H1B) ; " " ; CHR$ (0) ;
LPRINT "AAAAA" ; CHR$ (&HA) ;
LPRINT CHR$ (&H1B) ; " " ; CHR$ (1) ;
LPRINT "AAAAA" ; CHR$ (&HA) ;
LPRINT CHR$ (&H1B) ; " " ; CHR$ (12) ;
LPRINT "AAAAA" ; CHR$ (&HA)
END