Esc & s n m [a [p] s × a] m − n+1 – Citizen Systems CBM-270 User Manual
Page 51
CBM-270 User’s Manual
ESC & s n m [a [p] s
×
a] m
−
n+1
[Function]
Defining the download characters
[Code]
…
× a>] m-n+1 [Range] s = 3 32 ≤ n ≤ m ≤ 126 0 ≤ a ≤ 12 (Font A) 0 ≤ a ≤ 9 (Font B) 0 ≤ p1 … ps × a ≤ 255 [Outline] Defines the font of download characters of alphanumeric characters. • "s" indicates the number of bytes in vertical direction. • "n" indicates the start character code and m the end character code. To define only one • Character codes definable includes 95 ASCII codes in total between 32 ∼ 126. • "a" indicates the number of dots in horizontal direction for definition. • "p" is the data to be defined, which indicate a pattern equal to "a" dot in horizontal The rest of data to be defined is s x a. • Download characters thus defined remain valid until redefinition, ESC @ execution, GS * [Caution] Download characters and download bit images can not be defined simultaneously. Running this command clears the definition of the download bit image. [Default] Same as the internal character set [Example] Create each data bit by setting "1" for a printed dot and "0" for an unprinted dot. [Sample Program] [Print Results] See Sample Program and Print Results for ESC % on Page 50.
character, set n=m.
direction from the left end. The rest of the pattern on the right side is filled with space.
execution, or power OFF is practiced.