Canon C2550 - Manual (Page 36)

Interface Settings 2-10
2
Settings Common
to t
h
e Netw
or
k
Protocols
2
On the Network Settings screen, press [Ethernet Driver
Settings]
➞ specify the following.
● If you want the machine to automatically determine the
communication mode and Ethernet type:
❑
: [On]
If you reconnect the network cable (for example, reconnect the cable to a
different Ethernet hub) with the machine's main power switch ON, the Auto
Detect function will not work even if you set to [On]. Turn OFF
the machine, wait at least 10 seconds, and then turn it ON. (Connect the cable
with the machine's main power switch OFF.)
IMPORTANT
The machine automatically determines the Ethernet type. Press [On] unless you
want to specify a particular Ethernet setting.
● If you want to manually set the communication mode and Ethernet
type for specifying a particular Ethernet type setting:
❑
: [Off].
Select the appropriate items for and Type>, according to the network environment you are using.