Compaq 6000 - Manual (Page 129)

Getting Started 8–27
Upgrading the Computer
Reassembling the Computer
1. Replace the front bezel by following the
method appropriate for your computer model.
❏ To replace the front bezel on the 6000
model, position the chassis in the upright
position. At an angle, align the top of
the front bezel with the top slots of the
chassis
1 so that the front bezel hooks
onto the chassis, and then press the bottom
end of the bezel to the chassis until it snaps
into place
2.
Replacing the Front Bezel on the 6000 model