On Networks N300RM User Manual - Manual (Page 83)

Virtual Private Networking
83
N300 WiFi ADSL2+ Modem Router (N300RM)
VPN Wizard
The VPN Wizard automates many of the steps in setting up a VPN tunnel. If you do not want
to use the VPN Wizard or its default settings are not appropriate for your circumstances, use
one of these alternatives:
• Auto Policy
. Auto Policy uses the IKE protocol to define the authentication scheme and
automatically generate the encryption keys. See Use Auto Policy to Configure VPN
Tunnels on page 88.
• Manual Policy
. Manually enter the authentication and key parameters. See
Use Manual
Policy to Configure VPN Tunnels on page 91.
 To configure a gateway-to-gateway VPN tunnel using the VPN Wizard:
1. Select Advanced > VPN Wizard and click Next.
2. Fill in the Connection Name field and pre-shared key field.
3. Select the A remote VPN Gateway radio button and click Next.
4. Fill in the IP address or FQDN for the target VPN endpoint WAN connection, and click Next.
5.
Fill in the IP Address and Subnet Mask fields for the target endpoint that can use this tunnel,
and click Next.