On Networks N300RM User Manual - Manual (Page 66)

Network Management
66
N300 WiFi ADSL2+ Modem Router (N300RM)
• Poll Interva l. The interval at which the statistics are updated in this window. Click the
Stop button to freeze the display.
Connection Status
In the Router Status screen, click the Connection Status button:
• Connection Time . The time elapsed since the last connection to the Internet through the
Internet port.
• Connection Status . The connection status.
• Negotiation
. On or Off.
• Authentication . On or Off.
• IP Address
. The IP address assigned to the WAN port by the ISP.
• Subnet Mask . The network mask assigned to the WAN port by the ISP.
Wireless Settings and Guest Network (2.4GHz)
See Wireless Setup on page 30 for a more detailed description of these settings.
Name (SSID) . The Wi-Fi network name (service set ID) for the wireless network.
Region . The country where the unit is set up for use.
Channel
. The current channel, which determines the operating frequency.
Mode . The current Mbps setting.
Wireless AP . Indicates if the access point feature is enabled. If disabled, the Wireless LED
on the front panel is off.
Broadcast Name . Indicates if the modem router is configured to broadcast its SSID.
Wireless Isolation
. If this is on, wireless computers or devices that join the network can use
the Internet but cannot access each other or access Ethernet devices on the network
Wi-Fi Protected Setup . Shows whether WPS is configured on this network.
Allow guest to access My Local Network . If this is on, then people who use your guest
network can access equipment on your network, not just the Internet connection.