Wan setup, Guest network wan setup, Guest network – On Networks N300RM User Manual User Manual
Page 33
Modem Router Setup
33
N300 WiFi ADSL2+ Modem Router (N300RM)
Guest Network
You can set up a guest network to allow others to use your Internet connection.
To set up a guest network:
1.
Select Basic > Guest.
2.
Select the check boxes and radio buttons to specify the settings for your guest network.
The settings are similar to those in the Wireless Settings screen. See
3.
Click Apply.
WAN Setup
The WAN Setup screen lets you configure a DMZ (demilitarized zone) server, change the
maximum transmit unit (MTU) size, and enable the modem router to respond to a ping on the
WAN (Internet) port. Select Setup > Internet Port to view the following screen: