Remote management – On Networks N300RM User Manual User Manual
Page 78
Advanced Settings
78
N300 WiFi ADSL2+ Modem Router (N300RM)
Remote Management
The remote management feature lets you upgrade or check the status of your N300RM
Modem Router over the Internet.
To set up remote management:
1.
Select Advanced > Remote Management.
Note:
Be sure to change the modem router’s default login password to a
secure password. The ideal password contains no dictionary words from any
language and contains upper-case and lower-case letters, numbers, and
symbols. It can be up to 30 characters.
2.
Select the Turn Remote Management On check box.
3.
Under Allow Remote Access By, specify the external IP addresses to be allowed to access
the modem router’s remote management.
Note:
For enhanced security, restrict access to as few external IP
addresses as practical.
•
To allow access from a single IP address on the Internet, select Only This
Computer
. Enter the IP address that will be allowed access.
•
To allow access from a range of IP addresses on the Internet, select IP Address
Range
. Enter a beginning and ending IP address to define the allowed range.
•
To specify IP addresses, select IP Address List and type in the allowed IP
addresses.
•
To allow access from any IP address on the Internet, select Everyone.