Oakworks Relaxation Lounge - Manual (Page 18)

i
f the
Relaxation Lounge™
will not change position
:
• Check the outlet to be sure that it has power and that
the power cable is plugged in. Try the Hand Control to
see if it works.
• Unplug the power cable from the wall outlet. Remove dust cover.
Make sure that all male and female connectors are firmly
pushed into the control box. Even a slight misconnection can
cause a possible malfunction. Plug the unit back into the wall and
check the controls again. If one or more of the controls still
do not work, contact Customer Service at 800-558-8850 to
arrange replacement.
TroUbleshooTInG
CaUTIon
The lounge weighs 250 lbs.
Do Not lift or move the unit
without using proper safety
procedures or equipment.
Do Not turn the
Relaxation
Lounge™ on its side for any
reason. To do so could
cause damage to the base
and will void the warranty.
There are no serviceable
items that require this action
.
Never lift the lounge by
grasping the lounge top as
the table top is not
designed
to hold the weight of the
base and you could damage
the table.
CaUTIon
Before doing any work on the
unit,disconnect the power
cord from the power outlet.
Be sure to read all
cautions, warnings
and instructions given
in the manual to prevent
injury to both operator
and client.
• Controls
IMpORTANT 8
TROUBLESHOOTING
• If Relaxation Lounge™ will not Change Height or Position
TROUBLESHOOTING
11