Oakworks ProLuxe Convertible - Manual (Page 11)

8
E
Once the table supports are snug
against the sides of the portable
table, tighten the knobs to secure
into place.
F
Double check that the hinge of the
portable table is still aligned over the
center alignment groove.
PREPARE YOUR PROLUXE CONVERTIBLE
P
R
E
P
A
R
E
Y
O
U
R
P
R
O
LU
X
E
C
O
N
V
E
R
TI
B
LE
NOTE:
On tables with a backrest,
leave a little space between the end
bumpers and the backrest before
tightening to allow movement of
the backrest.
G
Insert strap into the center of the
table. Attach one end of the strap
as shown. Hold strap with one
hand and with the other hand,
slide strap thru the cleat. Then,
loop strap gently through the hook
behind the cleat.
H
Pull the strap thru the center of
the table and down into the space
between the two top parts. Snugly
attach the other end of the strap as
shown. (Pull down, insert in cleat,
pull firmly through cleat, gently
loop cord over small hook behind
the cleat.)
CAUTION
The table must be secured
properly to the base to insure
it is safe. Make sure the strap is
through the hook behind the
cleat.
I
Try to lift the portable table to check
for slack. There should not be much,
if any. If it is too loose, retighten
portable table secure strap.