Caution, Directions for use, Lift-assist back rest use – Oakworks PF250 User Manual
Page 13: Lowered arm rest use
10
DIReCTIOnS FOR USe
TO lOWeR The bACK ReST:
Press the lever under the head section and
push the back rest down.
TO RAISe The bACK ReST
Raise the back rest by pressing the lever
under the head section and lifting up to the
desired height. It is recommended that clients
take some of their weight off the back rest
while you lift.
CAUTIOn
lIFT-ASSIST bACK ReST USe
Do not sit on the Backrest section.
TO ChAnGe leveR POSITIOn:
The back rest lever can be moved to the
opposite side of the back rest by removing
the screws and relocating the hand lever to
the opposite side of the top into the four pre-
drilled holes.
Back rest
Control
The Lowered Arm Rest can be removed when not in use and stored away. It can also act as a table extender,
when used in place of the face rest or at the foot of the table. For complete use & care instructions see product
instructions “Arm rest shelf instructions” included with the arm rest.
Lowered Arm rest shelf with Aroma-
therapy, shown here with QuickLock™
Face rest
Lowered Arm rest shown here used
as a table extender
CAUTIOn
lOWeReD ARM ReST USe
Do not sit on or put excessive weight or pressure on lowered arm shelf.