Oakworks EC Series Procedure Chair - Manual (Page 9)

CAUTION
ARTICULATING LEG REST USE
Do not sit or stand on the articulating leg rest section. Do not use leg rest
section in assisting the patient on or off the chair.
6
DIRECTIONS FOR USE
TO RAISE THE LEG REST
Grasp the edge of the section and lift up until you
have achieved the angle needed. Release and it will
lock into place automatically.
TO LOWER THE LEG REST:
Twist and hold the knob under the leg rest and push
leg rest down. Release the knob and the leg rest will
stay in place.
TO LOWER SIDE RAILS & ARM REST
Push side rail or arm rest in lightly towards the center of the
chair, then pull locking knob down towards the base. Fold
side rails or arm rest down and under the chair.
TO RAISE SIDE RAILS & ARM REST
Grasp side rail or arm rest and rotate to the raised position.
When fully up, it will lock into position. Check that the side
rail or arm rest is locked by applying light outward pressure.
SIDE RAIL & ARM REST USE
Grasp Firmly & Lift
Release Knob