Oakworks EC Series Procedure Chair - Manual (Page 5)

Weight Limit: (patient and accessories) 550 lbs. (250 kg) Do not exceed.
• The Back Rest and Leg Rest sections are not designed to support the entire weight of the patient. Do
not sit on the Back Rest or Leg rest sections.
• Be certain that the chair is completely lowered prior to discharging an ambulatory patient. The patient
may lose balance and fall.
• This chair is not suitable for use in the presence of flammable anesthetic mixture with air or oxygen or
nitrous oxide.
• Do not lift chair by the cushions. This can damage the chair.
• When lowering the chair, make sure there is nothing underneath that can impede motion (like stools, cabi-
nets, accessory parts, cleaners, etc)
• Use this medical device only for its intended use as described in these instructions. Do not use attach-
ments not recommended by the manufacturer.
• Close supervision is necessary when this medical device is used near children or disabled persons.
• Weight limit for footrest is 140 lbs. (64 kg)
WARNING
1. To reduce the risk of burns, fire, electric shock or injury to persons:
2. Unplug this product from the electrical outlet before cleaning.
3. Unplug from outlet before adding or removing parts.
4. Never operate this chair if:
• It has a damaged cord or plug,
• If it is not working properly,
• If it has been dropped or damaged or dropped into water.
• Contact Customer Service before use if you suspect damage
5. Keep the cord away from heated surfaces.
6. Never drop or insert any object into any opening.
7. Do not use outdoors.
8. Do not operate where aerosol (spray) products are being used or where oxygen is being administered.
DANGER
Risk of electric shock - Connect this medical device to a properly grounded outlet only. See Grounding
Instructions in this manual.
Electrical Shock Hazard. The power supply/control module is located on the scissors lift. No user service-
able parts are inside the control box. Refer servicing to qualified personnel. Unplug from wall prior to con-
ducting service procedures.
2
IMPORTANT SAFETY INSTRUCTIONS