Oakworks Clodagh Virgo - Manual (Page 5)

3
SAFETY
INSTRUCTIONS
Improper use of this device can cause injury. Be sure to read all
operating instructions prior to use to prevent injury to operator or client.
Electrical Shock Hazard.
To reduce the risk of electric shock, always disconnect the table from
the electrical outlet before moving the table or doing any maintenance
or troubleshooting procedures. Never use this equipment if it has a
damaged cord or plug. Use this equipment only for its intended use as
described in these instructions. Do not use any attachment or accessories
not recommended by the manufacturer.
To reduce the risk of burns, fire, electrical shock (electric model only)
or injury:
• The power supply/control module is located under the top. Refer
servicing to qualified personnel and follow manual instructions
when doing any authorized troubleshooting. Before doing any work on
the unit, disconnect the power cord from the power outlet.
• Before cleaning with any liquid cleaner be sure to un-plug the power cord
from the power outlet. Do not operate the table in standing water.
• Before moving the table, disconnect the power cord from the power outlet
and secure the electrical cord and foot control out of the way for moving.
• Risk of Electrical Shock. – Connect this table to a properly grounded outlet
only. See Grounding Instructions.
• Use this furnishing only for its intended use as described in these
instructions. Do not use attachments not recommended by the manufacturer.
• Never operate this table if it has a damaged cord or plug, if it is not working
properly, if it has been dropped or damaged, or dropped into water. Return
the table to a service center for examination and repair.
• Keep the cord away from heated surfaces.
• Do not use outdoors.
• Do not operate where aerosol (spray) products are being used or where
oxygen is being administered.
Risk of Injury – Keep children from moving top.
Never drop or insert any object into any opening.
WARNINGS & CAUTIONS
SAFETY INSTRUCTIONS
WARNING