Oakworks Clodagh Virgo - Manual (Page 13)

11
DIRECTIONS FOR USE
MOVING THE VIRGO™
DIRECTIONS
FOR
USE
Before doing any work on the
table, disconnect the power
cord from the power outlet
and secure the electrical
cord, (electric table only) and
foot controls for moving.
The table weighs as much
as 200 lbs.
DO NOT lift or
move the unit without using
proper safety procedures
or equipment.
DO NOT turn
the table on its side for any
reason. To do so could
cause damage to the base
and
will void the warranty.
There are no serviceable
items that require this action
.
Never lift the table by grasp-
ing the table top as the
table top is not
designed to
hold the weight of the base
and you could damage the
table.
at low height range
Grasp
at base
corner
The Virgo™ weighs approximately 200 lbs. You will need 4 people
working together if it is necessary to move the table. Never lift the table
by grasping the table top as the table top is not designed to hold the
weight of the base and you could damage the table and the electronics
that run the tabletop.
If you need to move the table, place one person at each corner of the
table. Have each person firmly grasp the wooden base at the bottom
and lift the table from the base. As when moving any piece of heavy
equipment, bend at the knee and lift with your legs beneath you and
not with your back. Be aware and use proper, safe procedures for
moving a table of this size to prevent injury to yourself or the table.
We strongly recommend that a flatbed dolly be used that can hold the
entire table if moving the table involves any distance.
CAUTION
CAUTION
I
f the
A
ntiguA
™
wIll not change heIght or posItIon
:
• Unplug the power cable from the wall outlet.
• Make sure that all male and female connectors are firmly
pushed into each other. Even a slight misconnection can
cause a possible malfunction.
• Plug the unit back into the wall and check the controls
again. If one or more of the controls still do not work,
contact Customer Service at 800-558-8850 to arrange
replacement/repair.
IF THE VIRGO™ WILL NOT CHANGE HEIGHT
(ELECTRIC MODEL ONLY)