beautypg.com

Backrest operation – Oakworks Cabana Lounger User Manual

Page 8

background image

DIRECTIONS FOR USE

DIRECTIONS FOR USE

5

TO CHANGE LOUNGER HEIGHT

Each leg has a self retaining spring loaded pin to adjust the height of the

table. Put the table on its side so that all 4 legs are horizontal. Be sure to lay

the lounger on a protective surface to prevent lounger damage.

Pull pin out and move the leg to the desired height. Release the pin and it

will fit lock into a hole in the leg. Repeat this procedure for all four legs.

BACKREST OPERATION

TO RAISE THE BACKREST
The Cabana Lounger has an adjustable
backrest with 6 fixed positions. To raise the
backrest, lift the top at the head end of the
table. Raise backrest to the desired height and
release. Backrest support arm will lock in the
nearest slot in the side rail.

lift slightly

lift slightly

then lower backrest to the desired position.

TO LOWER THE BACKREST

To lower the backrest, lift the backrest
slightly, lift and hold the support arm out
of the slot and lower the backrest to the
desired position.