beautypg.com

Oakworks Cabana Lounger User Manual

Page 7

background image

INSTALLATION

4

Using the 1/2” wrench, tighten all

nuts securely. Repeat steps 3-5 on

remaining corners, installing the

remaining three leg assemblies to

the skirt.

step 5

Place (1) acorn nut on each leg stud

at the backrest end only and tighten

with the 9/16” wrench.

step 6

ASSEMBLY

Each leg has a self retaining spring

loaded pin to adjust the height of

the table. Pull pin out and move

the leg to the initial desired height.

Release the pin and it will lock

into a hole in the leg. Repeat this

procedure for all four legs.

step 7

Turn table upright, raise backrest

and install plastic cap in pre drilled

holes on the top of each leg. (on the

backrest end only)

Note: it is recommended to have

2 or more people to assist with

moving the table.

step 8

plastic cap