Oakworks 300 Series Procedure Chair Rev.B - Manual (Page 11)

DIReCTIOnS fOR USe
8
CAUTIOn
heAD ReST USe
Do not extend the dowels more than 4” (10 cm.) from the Back Rest section.
Adjustable large
The Adjustable head rest
angle is adjusted using a
locking knob. The head rest
distance from the table is
adjusted by using a knob.
To adjust the position of
the head rest, follow these
steps:
The Large head rest is
adjusted by using the knob.
heAD ReST AnGle (Adjustable head Rest only)
Turn knob counter-clockwise
to unlock the cam.
Move head rest platform to
the desired position.
Turn knob clockwise to lock
the cam.
heAD ReST AnGle (Adjustable head Rest only)
Loosen knob by turning coun-
ter-clockwise.
Pull up on the head rest to
expose the dowels.
Firmly tighten the knob by turn-
ing clockwise to avoid slipping
when in use.