Oakworks 300 Series Procedure Chair Rev.B - Manual (Page 10)

DIReCTIOnS fOR USe
The chair can be rotated with a patient in it. Locate the black push buttons at the top of the back rest section.
Press in and hold either one of the buttons to disengage the base locking mechanism. While holding in the push
button, rotate the chair to the desired position up to 240°.
7
CAUTIOn
SWIvel bASe USe
When rotating the chair, make sure there is nothing around the chair that can impede the
rotational motion (like stools, cabinets, etc)
rotate up
to 240
º
1. Fully lower the powered
foot rest to allow access to
the stirrup.
3. Fold out to fully open
position.
2. Grasp Stirrup handle &
pull out firmly while lifting
slightly. Pull fully out.
4. To rotate stirrup to the
desired angle, lift slightly
and move to the desired
position. There are 3
detent positions. Stop lift-
ing and move slightly left
or right for the nearest
detent position.
5. To reduce stirrup
length, lift the handle
slightly and push into
desired position. Stirrup
will automatically lock
into nearest detent posi-
tion. To store stirrups, lift slightly, rotate towards the middle of the chair and
fold the foot rest down. Then lift slightly and push into the storage position.
ReTRACTAble fOOT ReSTS (STIRRUP) USe
CAUTIOn
Pinch Point - Keep fingers away from pinch point.