NORAC UC5-BC-AGCO-RMC - Manual (Page 6)

6 |
3. UC5 Operation
The UC5™ Spray Height Control system will work well in most situations. As with any equipment, it is
important that the operator remains alert at all times. There may be some situations and terrain where
performance is limited. In these situations, the operator must resume manual control of the booms.
To navigate to the UC5 screens, press the UC5 icon on RMC.
If the boom is above normal working height (60 inches/152 cm), a warning message will appear requiring
the boom to be lowered before allowing Automatic Mode to be activated. Double tapping the Main Up
switch will put the system into Manual Mode. Double tapping the Main Down switch will put the system
into Automatic Mode.