NORAC UC5-BC-AGCO-RMC - Manual (Page 23)

23 |
3.7.2. Headland Assist Mode
Headland Assist is used to raise the wings only or the entire boom at the end of the field for turning.
This feature operates when the system is in Automatic Mode. The headland mode height can be changed
while the boom is in headland mode by simply adjusting the target height. The Headland Assist feature can
operate in two different modes; Main or Wings Only.
If Headland Mode is set to Main, when the Headland Assist is triggered the wings will temporarily be
disabled and the main lift will raise to the predetermined Headland Assist height to allow the operator to
turn around at the end of the field. When triggered again, the entire boom will return to Automatic
Mode.
If Headland Mode is set to Wings Only, when the Headland Assist is triggered only the wings will raise to
the Headland Assist height. When triggered again, the entire boom will return to Automatic Mode.