NORAC UC5-BC-AGCO-RMC - Manual (Page 16)

16 |
If the list of modules matches the currently installed modules,
select the Check button.
You will then be instructed to place your booms so the nozzles
are 35” (90cm) from the ground. Adjust the distance from the
nozzle to the ground directly beneath. Ensure you are over bare,
flat soil.
When the measured distance is 35” (90cm) select Check button.
You will then be instructed to hold the Check button. Continue
holding while each boom section is moved. The boom will be in
motion. When this is done, the display will instruct you to
release the Check button. Do not move the booms at this time.