NORAC UC4+BC+HD4 Part 1 - Manual (Page 30)

26
4.10 E
LECTRICAL
I
NSTALLATION
Ensure the UC4+ Control Panel is OFF
for the remainder of the installation
(Bottom of switch pressed IN). Use
caution when handling the 12 V power
line of the sprayer wiring.
Depending on the electronics used
on the sprayer (DAH or DAH09),
either the NORAC part 44658-51 or
44658-78 will be required for this
installation. For installations using
44658-51, proceed to section 4.10.1.
For installations using the 44658-78
proceed to section 4.10.2.
Figure 28: HARDI DAH on Left (use 44658-51) vs. DAH09 on Right (use 44658-78)