NORAC UC4+BC+HD4 Part 1 - Manual (Page 21)

17
4.5 R
OLL
S
ENSOR
I
NSTALLATION
Mount the roll sensors to the included roll
sensor brackets using the machine screws and
nylon lock nuts, as illustrated in Figure 17.
Ensure roll sensor assemblies are
oriented as shown in Figure 18 with
the cable exiting towards the right-
hand wing.
The roll sensors must be mounted
tightly to the brackets.
Figure 17: Mounting the Roll Sensor to the Roll Sensor Mounting Bracket
Figure 18: Roll Sensor Mounting with Respect to Sprayer Orientation
* The boom frame roll
sensor does not have a
temperature probe