New England Arbors VA42057 - Manual (Page 7)

www.edenarbors.com
S T E P F O U R
7 10 x 10 Flat Top Pergola Canopy
Attach Canopy
1
2
1
2
Navigate the canopy between the retainer bar and the end rafters
and over the pergola as shown. A helper would be required.
Attached the second set of pipe together (80” & 26½”) and insert
into the opening at the end of the canopy as shown.
Notes:
1. Canopy can be adjusted by first ‘pushing’ up on the one end
and pulling down on the other end (or use a helper).
2. To remove canopy, simply remove the steel insert from one
end and slide the canopy out.