New England Arbors VA68122 - Manual (Page 3)

S T E P T H R E E
3
Insert the assembled pergola top through the holes at the top
of the posts. You will need a helper.
Push the side panel posts until the spacing appears even between
the inside of the post and the first rafter with the remaining
rafters. Final adjustment to allow for a 42" opening between posts
(allows for minor variance if necessary unless installed with a
cozy arbor bench which is sold seperately).
1
The Monaco Arbor
Connect Arch System to Side Panels
2
1 3
www.edenarbors.com
2
42
4
Fasten the pergola beam to the posts by installing the screws
provided into the 2-pre drilled holes per post.
Pressure fit the diamonds into the square area designated
by tensioning into the horizontal and vertical routed holes
(four points of contact). Place post caps on top of posts.
3
4
R
R
L
L
R
L
R
L
R