Microtel Series 1000EX - Manual (Page 7)

MICROTEL Series 1000EX Dialer
1
INTRODUCTION
hank you for choosing the Microtel Series 1000EX Dialer to implement your
remote alarm monitoring and control solutions. You have chosen a product that is
simple to set up and easy to use. The Series 1000EX has been designed and
manufactured to operate with minimal operator intervention.
T
The Microtel Series 1000EX features a single level, interactive command structure--there
are no multi-level menu structures to navigate. Commands are sent to the Series 1000EX
through your telephone either locally or during a call to or from the dialer, by pressing a
sequence of touch-tones on your telephone. Each command entered is acknowledged
with a spoken response from the dialer, providing verification that the command was
entered correctly and understood by the dialer.
The Series 1000EX features true modularity--I/O channels operate completely
independently of each other. Using the commands listed in this manual, each I/O module
in your dialer can be configured to operate uniquely to satisfy your application
requirements. For each I/O channel, you may record a voice message, choose the format
of spoken status reports, program an alarm integration delay, alarm call out operation,
and telephone number calling sequence. Analog inputs also have user-selectable low and
high alarm setpoints.
About this Manual : This manual is organized with the most crucial information in
the front; more advanced topics are saved for last or included in the appendices.
Who Should Read this Manual: Anyone involved with use of the dialer should
read the General Description and Operation chapters of the manual. The Operation
chapter in particular should be read by any personnel who may be required to respond to
alarm calls from the dialer. The additional chapters can be read at a later time, or when
necessary by authorized personnel to maintain the dialer or troubleshoot any problems
you might encounter. System administrators should read the Advanced Topics chapter
for information on the use of the dialer’s remote software configuration capabilities.
In a Hurry to Setup?: Read the quick start section of the Installation chapter.
If you encounter a difficulty that cannot be resolved using the information in the manual,
call MICROTEL at (225) 303-0436.
Again, thank you for choosing MICROTEL.