Microtel Series 1000EX - Manual (Page 44)

MICROTEL Series 1000EX Dialer
38
Low Setpoints The value at which a low alarm occurs for this analog input (0%
disables this channel's low alarm).
*cc91*
Review I/O c analog input low setpoint
**cc91aaa* Program I/O c analog input low setpoint
Example- Command:
**0191123*
Response: Channel one analog input low setpoint is one two point
three percent.
NOTE: All analog inputs or outputs are expressed as a percentage of full scale with a
range of 0% (zero) to 99.9%. A simple conversion from percentage to actual
engineering values is made with a direct proportion. A conversion chart is
provided in the Appendix to convert to and from commonly used engineering
values. To use these charts, locate the percentage or engineering unit and read
the corresponding conversion.