MF Digital DIRECTOR PRO Series - Manual (Page 59)

MF Digital Director/Director Pro Series Publishing System User Manual Revised July 2010
Page 59
copying discs, unloading discs, etc.), and the estimated time of completion
(E.T.C).
The lower pane is the COMPLETED JOBS window that lists all the jobs
completed by the DIRECTOR/DIRECTOR PRO. Information displayed for
each job includes: its assigned JobID, the total number of requested discs,
the number of successful discs produced, the number of failed discs
produced and the time each of the jobs was completed.
The Production Process
During production the blank discs will be loaded one at a time from the
input spindle into the recorders and/or printer. Upon successful completion
the discs will be unloaded onto the output spindle. This process will
continue until the job is complete, and the DIRECTOR/DIRECTOR PRO
will then advance to produce the next job in the queue according to its
priority.
However, if the 1
st
input spindle empties before the job is complete the
DIRECTOR/DIRECTOR PRO will then go to the 2
nd
input spindle. If the
2
nd
input spindle is empty the DIRECTOR/DIRECTOR PRO will go to the
third spindle. If the third spindle is empty the screen will now display:
To continue producing the job, place additional blank discs onto the 1
st
input spindle and click the Yes button. To stop the job click the No button
and the remainder of the job will be aborted. The DIRECTOR/DIRECTOR
PRO will then advance to produce the next job in the queue according to its
priority.
Any discs dropped on the reject/centering spike have failed to record
properly and should not be used. Be sure to remove rejected discs
periodically during operation, if the need arises.