MF Digital DIRECTOR PRO Series - Manual (Page 16)

MF Digital Director/Director Pro Series Publishing System User Manual Revised July 2010
Page 16
The System Setup tab is divided into a number of information fields that
must be completed.
Printer Driver (Required)
The Printer Driver pull-down is used to indicate to the
DIRECTOR/DIRECTOR PRO the type of printer that is installed.
• Click the Printer Driver pull down and select your printer.
Operator’s Email Address (Optional)
The OPERATOR’S EMAIL ADDRESS field is a user defined email
address to which a network attached DIRECTOR/DIRECTOR PRO will
send a message when the unit requires attention (such as an empty input
spindle, etc.). The email feature requires the presence of a POP3 or IMAP
server on the network and that an email client account be created for use by
the DIRECTOR/DIRECTOR PRO.
• Click the Operator’s E-mail Address field and enter an email address.
Leave the field blank if the DIRECTOR/DIRECTOR PRO is not
attached to a network or if you do not want to receive unit attention
messages.
Recording Speed (Required)
The Recording Speed pull-down allows you to set the recording speed as
determined by the capabilities of the recorders installed in the
DIRECTOR/DIRECTOR PRO.
• Click the Recording Speed pull down either for CD, DVD, or Blu-ray (if
equipped) and select the desired recording speed.
• Click Apply to activate the changes.
For CD: “4x, 8x, 12x, 16x, 20x, 24x, 40x,” or “maximum speed”
For DVD: “6x, 8x, 12x” or “maximum speed”
DIRECTOR/DIRECTOR PRO sends email via MAPI hence you must
first setup a MAPI email client on the DIRECTOR/DIRECTOR PRO.
Make sure you set this client to be used from MAPI based applications.
Note:
Note: