MF Digital DIRECTOR PRO Series - Manual (Page 52)

MF Digital Director/Director Pro Series Publishing System User Manual Revised July 2010
Page 52
Job Menu Bar
Horizontally along the top of the Job tab is a menu bar that contains five
buttons: New, Open, Save, About, Help.
Job Menu Buttons:
New Creates a new job.
Open Loads an existing job file (*.JOB).
Save Saves the current job file (*.JOB).
About Displays the current version information of the
DIRECTOR/DIRECTOR PRO application.
Help Displays on-screen help.
General Options
Vertically along the left side of the Job tab is a series of nine check boxes:
Copy
, Verify, Print, Print First, Simulate, Archive, Align, SmartGuard
Media . The first step in creating a job is to set the general options so as to
define which operations the DIRECTOR/DIRECTOR PRO will perform
when the job is submitted for production.
• Check or uncheck the option boxes to enable or disable the production
options needed for your job:
General Options:
Copy When checked, the discs in the submitted job will
be recorded using the disc image file selected in the
IMAGE field.
Verify When checked, the discs in the submitted job will
automatically be compared against the source files
after recording is completed.
NOTE: Director Blu-ray System Only, audio CDs
are verified via TOC only. All other files will be
verified using the complete source.
Print When checked, the discs in the submitted job after
DIRECTOR/DIRECTOR PRO systems equipped with Pioneer
DVD-R drives do not support MF Digital SmartDRIVE features.
Note: