MF Digital DIRECTOR PRO Series - Manual (Page 19)

MF Digital Director/Director Pro Series Publishing System User Manual Revised July 2010
Page 19
Default Image File Folder (Required)
The DEFAULT IMAGE FILE FOLDER field is used to specify the default
location where disc image script (*.ISC) will be saved. The factory setting
(C:\discDIRECTOR\Images\) should be sufficient for most uses. To change
the default setting:
• Click the Browse button below the DEFAULT IMAGE FILE FOLDER
field.
• Select the volume and DIRECTOR/DIRECTOR PRO where you wish to
save disc image files.
• Click the OK button.
Default Label File Folder (Required)
The DEFAULT LABEL FILE FOLDER field is used to specify the default
location where disc label files (*.LBL) will be saved. The factory setting
(C:\discDIRECTOR\Labels\) should be sufficient for most uses. To change
the default setting:
• Click the Browse button below the DEFAULT LABEL FILE FOLDER
field.
• Select the volume and DIRECTOR/DIRECTOR PRO where you wish to
save disc label files.
• Click the OK button.
Loader Options
Shake Disc – By selecting Shake Disc the loader arm will shake the disc
after picking to prevent multiple discs being lifted at the same time.
Though, you should always separate the media as you load to the unit as this
helps prevent discs from sticking together as well.
Spindle Select – By selecting this option the left and right spindles are
separated respectively to DVD and CD. NOTE: Keep in mind, when
selecting this option; you only load 75 Discs in each hopper. As the output
hopper is now shared.
Creating New Privileges Profile
Control access to the DIRECTOR/DIRECTOR PRO by restricting use to
only authorized users. The main intent of this is for jobs submitted remotely