4 configuration tab, 5 command register tab, Configuration tab – Maxim Integrated 78M6610+LMU Evaluation Kit User Manual

Page 15: Command register tab

Text mode
Original mode

78M6610+LMU Evaluation Kit User Manual

Rev 1

5.1.4 Configuration Tab

The Configuration tab is used to set up the sensor interface. Once this is done it can be saved to NVRAM for
future use, or programmed to a user-defined configuration and saved. See the Calibration tab for saving the
settings.

5.1.5 Command Register Tab

The Command Register tab is a read/write control tab for manual operation of the command register (0x00).
Hex and decimal formats are supported.