Longshine LCS-WR5-3214N - Manual (Page 45)

November 10, 2008 / Version: 2.0 40
MAC Filter
The Wireless Router could filter the outgoing packets for security or management
consideration. You can set up the filter against the MAC addresses to block specific
internal users from accessing the Internet.
MAC Filter Settings
Items Information
Select to enable or disable MAC filter function.
Enable This Rule
Fill in the MAC address that you wish to filter. MAC Address
Input any text to describe this mapping, up to 16
alphanumerical characters. Comment
After configure the above settings, click Apply to
add a new list in the following IP / Port Filter Rule
List; or click Reset to reset all the setting. Apply / Reset Button
* Please click on the Save Settings button or the Reset Settings button on the above table
to save/reset the configurations.
MAC Filter Rule List
Lists the MAC Filter Settings you have added before. Click on the list to change
configuration, or the button to delete the list.