Longshine LCS-WR5-3214N - Manual (Page 21)

PPPoE (ADSL)
Items Information
Fill in the User Name and Password that provided by
your ISP.
Username and
Password
Retype the password to confirm. Verify Password
To enable the Maximum Transmission Unit of Router
setup. Any packet over this number will be chopped
up into suitable size before sending. Larger number
will enhance the transmission performance. MTU
Enter your MTU number in the text-box to set the
limitation (default 1492 bytes).
MRU To enable the Maximum Receiving Unit of Router
setup. Any packet over this number will be chopped
up into suitable size before receiving. Larger number
will enhance the receive performance.
Enter your MRU number in the text-box to set the
limitation (default 1492 bytes).
Host Name The name of this device. The default name is
“Wireless_11n_Router.”
Mark the checkbox to enable others detecting this
device from WAN, and clear the checkbox to disable.
Ping from WAN
Select to use the following MAC as the MAC address
while serving Internet: WAN Ethernet
MAC
Original MAC: the MAC of the device.
Manual Settings: the MAC of your computer. Click on
“
Clone MAC Address from your Computer ” to clone
your computer MAC address in the blank. You can
also change the MAC address if you need.
* Please click on the Save Settings button or the Reset Settings button on the above table
to save/reset the configurations.
November 10, 2008 / Version: 2.0 16