Longshine LCS-WR5-3214N - Manual (Page 27)

November 10, 2008 / Version: 2.0 22
QoS Settings
The QoS (Quality of Service) Settings page provides different priority to different
users or data flows.
Bandwidth Settings
Items Information
Mark to enable the configuration, and clear to disable.
Enable this
Rule
Fill in the IP address that you wish to control. LAN IP
Address
Select the bandwidth level of “high,” “normal,” or “low.” Bandwidth
Give a definition to the LAN IP Address. Comment
After configuring the above settings, click Apply to add
a new list in the following MAC Access Control List. Or
click the Reset button to reset the configurations. Action
* Please click on the Save Settings button or the Reset Settings button on the above table to
save/reset the configurations.
QoS Settings Rule List
Lists the Bandwidth QoS Settings you have added before. Click on the list to
change configuration, or the Delete button to delete the list.