Longshine LCS-WR5-3214N User Manual

Page 40

WPS Summary

Shows the information of WPA current status, configured, SSID, authentication

mode, and pre-shared key. Click on Reset OOB button to Reset WPS AP to the

OOB (out of box) configuration.

WPS Progress

Items

Information
PIN method (Personal Identification Number):
read the PIN from either a sticker on the new
STA or a display.

WPS mode

PBC method (Push Button Communication): in
which the user simply has to push a button,
either an actual or virtual one, on both the AP
and the new STA. (Users can simply push the
EZsetup button

on the front panel of the

device

or the Save Settings button in this GUI

page after selecting this mode.)

Add Enrollee PIN Code

Users have to fill in the PIN code to enrollee
device if selecting PIN mode as the WPS
Config method.

* Please click on the Save Settings button or the Reset Settings button on the above table

to save/reset the configurations.

WPS Status

Shows the current WPS status.

This button may not supplied depend on your model. Users can click on the Build WPS Connection button in the

WPS settings web page to reach the same function.

November 10, 2008 / Version: 2.0