Longshine LCS-WR5-3214N - Manual (Page 24)

November 10, 2008 / Version: 2.0 19
Items Information
PPTP Server IP
Address Fill in the PPTP Server IP address that provided by
your Internet Service Provider (ISP).
Username and
Password Fill in the User Name and Password that provided by
your ISP.
Verify Password Retype the password.
MTU To enable the Maximum Transmission Unit of Router
setup. Any packet over this number will be chopped
up into suitable size before sending. Larger number
will enhance the transmission performance.
Enter your MTU number in the text-box to set the
limitation (default 1492 bytes).
Address Mode Select to use Static or Dynamic IP mode.
IP Address,
Subnet Mask and
Default Gateway Fill in the IP address, Subnet Mask and Default
Gateway that provided by your ISP.
Host Name The name of this device. The default name is
“Wireless_11n_Router.”
Ping from WAN Mark the checkbox to enable others detecting this
device from WAN, and clear the checkbox to disable.
WAN Ethernet
MAC Select to use the following MAC as the MAC address
while serving Internet:
Original MAC: the MAC of the device.
Manual Settings: the MAC of your computer. Click on
“
Clone MAC Address from your Computer ” to clone
your computer MAC address in the blank. You can
also change the MAC address if you need.
* Please click on the Save Settings button or the Reset Settings button on the above table
to save/reset the configurations.