Longshine LCS-WR5-3214N - Manual (Page 22)

L2TP
Layer 2 Tunneling Protocol (L2TP), a tunneling protocol used to support virtual
private networks (VPNs).
Items Information
Fill in the L2TP Server IP address that provided by
your Internet Service Provider (ISP).
L2TP Server IP
Address
Fill in the User Name and Password that provided
by your ISP. Username and
Password
Retype the password to confirm. Verify Password
To enable the Maximum Transmission Unit of
Router setup. Any packet over this number will be
chopped up into suitable size before sending.
Larger number will enhance the transmission
performance. MTU
Enter your MTU number in the text-box to set the
limitation (default 1492 bytes).
Address Mode Select to use Static or Dynamic IP mode.
Fill in the IP address, Subnet Mask and Default
Gateway that provided by your Internet Service
Provider (ISP).
IP Address, Subnet
Mask and Default
Gateway
The name of this device. The default name is
“Wireless_11n_Router.” Host Name
Ping from WAN Mark the checkbox to enable others detecting this
November 10, 2008 / Version: 2.0 17