Longshine LCS-8156C1 - Manual (Page 33)

AT Commands for CX930xx Modem Reference Manual
102752B Conexant 3-9
+GCI - Country of Installation
This extended syntax command selects and indicates the country of installation for the
modem. This parameter selects the settings for any operational parameters that need to be
adjusted for national regulations or telephone networks.
Syntax
+GCI=
Defined Values
8-bit country code from Annex A of T.35. The value is the
hexadecimal equivalent of the T.35 code, with bit 8 treated as
the most significant bit and bit 1 treated as the least significant
bit.
The supported countries are listed in the CX930xx modem
data sheet.
Default
If the modem is specified for use in only one country, that country code is the default.
Otherwise, the default is defined by the OEM. Factory default is B5 (United States).
Reporting Current or Selected Values
Command: +GCI?
Response: +GCI:
Example: +GCI: 3D The modem is set for France.
Reporting Supported Range of Parameter Values
Command: +GCI=?
Response: +GCI: ([,[,
Example: +GCI: (00,B4,B5) The modem can be set for Japan, United
Kingdom, or the United States.