Longshine LCS-8156C1 - Manual (Page 112)

AT Commands for CX930xx Modem Reference Manual
3-88 Conexant 102752B
+PMHT – Modem-on-Hold Timer
This command controls whether or not the modem will grant or deny a modem-on-hold
(MOH) request as well as setting the MOH Timeout value.
Syntax
+PMHT=
Defined Values
Decimal number corresponding to selected setting.
0 Deny V.92 modem-on-hold Request (Default.)
1 Grant MOH with 10 second timeout
2 Grant MOH with 20 second timeout
3 Grant MOH with 30 second timeout
4 Grant MOH with 40 second timeout
5 Grant MOH with 1 minute timeout
6 Grant MOH with 2 minute timeout
7 Grant MOH with 3 minute timeout
8 Grant MOH with 4 minute timeout
9 Grant MOH with 6 minute timeout
10 Grant MOH with 8 minute timeout
11 Grant MOH with 12 minute timeout
12 Grant MOH with 16 minute timeout
13 Grant MOH with indefinite timeout
Result Codes
OK 0-13 in V.92 Mode (+MS=V92)
ERROR Otherwise
Reporting Current or Selected Values
Command: +PMHT?
Response:
Example: 0 For the default setting.
Reporting Supported Range of Parameter Values
Command: +PMHT=?
Response: ( range)
Example: (0-13)