LABEC M-MIA-CC - Manual (Page 71)

Ultrasonic milk analyser
Operation manual 23.08.10 69/98
FatCo = 1.00 SNFCo= 2.00
Where:
column
N: measurement consecutive number
column DelN: deliverer’s number, sorted by ascending number
column Ltrs delivered liters
column Fat% measured Fat in percentage
column SNF% measured SNF in percentage
column Rate calculated Rate (according formula 1)
column Amount calculated Amount (according formula 2)
Total Litres sum of liters delivered. Liters are received by
weighted kilos, using the formula:
Litres = Kilograms / Density
where
Density is measured sample’s density
Total Amount
sum of all calculated Amount (according formula 4)
Average Fat average Fat value, calculated according formula 3
Average SNF average SNF value, calculated according formula 5
FatCo, SNFCo values of the coefficients, used in formula 1
All Large Rep - makes detailed report for each sample separately for all
the calibrations (Rep for Calibr) on the chosen device (Sel Out Device).
Shift Selector – user selects which name (Shift 1 or 2 – enter from IBM
PC) will be printed in the header of each list from LPT report. Using the
program
LS-SetReports.exe (see its description) the operator has the
possibility to edit the name of the Milk Collecting Center and 2 unique names
for two work shifts.
Select Shift
For Report:
Morning
Morng OK Eveng
Print Page Num – generates total report, but the printing out starts from
chosen by the operator sheet.
Print Report
Page Num:
Group Tools