LABEC M-MIA-CC - Manual (Page 67)

Ultrasonic milk analyser
Operation manual 23.08.10 65/98
measurements user can control current archive number using “Page 2
Results”.
Show Records
Busy: 0038/0000
Free: 0962
Exit
where:
Busy xxxx / yyyy
xxxx - number of measurements, which will be used when generating
reports
yyyy - number of measurements, which will not be used when
generating reports i.e. were marked as invalid using the command Reject
Deliv N
New Report – deletes the old archive. In this way the number of free
records for making archives of the results remains 1000.
Start New Rept
No
No OK Yes
The operator has to be very careful with this command, because, by
choosing Yes the whole archive from previously made measurements will be
deleted and the memory will be set to zero, free for new measurements to be
stored.
Reject Deliv N – measurement for selected Deliverer Number are
excluded from reports.
Reject meas for
Del N:
Del last Meas – deletes the archive from the last measurement. If this
command is repeated, it deletes the result from the measurement before the
last one etc. till the wh
Del Last Meas
OK! Free = xxxx
Exit