LABEC M-MIA-CC - Manual (Page 17)

Ultrasonic milk analyser
Operation manual 23.08.10 15/98
If in the process of exploitation there is a need to ask a question the
company-producer, you have to send the data, written on the display during
the above described initialization procedure.
3.2.1.4.Till the analyser is prepared for work (at about 5 minutes) the
following message is written on the display: “Getting ready”. Above pointed
time is in dependence of the environmental temperature and increases with
decreasing the temperature.
3.2.1.5. When the device is ready for work, a beep is heard and the display
shows: “Ready to start”. The analyser is ready to make analyses in mode 1
(normally Cow)
3.2.1.6. If you want to pass to another mode press the button Enter and hold
it pressed. The following message appears on the display:
Release button to
start menu
Release the button Enter. The display shows the possible working modes:
Milk selector
Cal1 – Cow
Cal2 – Sheep
Cal3 – UHT
------------------------------
Cleaning
Final clean
Using “up”▲and”down”▼buttons choose the working mode and press Enter
in order to start it.
3.2.2. Making analyses