LABEC M-MIA-CC - Manual (Page 54)

Ultrasonic milk analyser
Operation manual 23.08.10 52/98
The operator has the following two possibilities:
1. To cancel the entered data by pressing the button 0 on the keyboard and
to start entering them again.
2. To confirm the entered data by pressing the button # (Enter) on the
keyboard, and then the display will show currently chosen calibration. Now
the device is ready to start measurement. After finishing the measurement,
data, entered for the supplier are printed out.
8.2. Working with the printer
8.2.1. Basic printer characteristics
Printing method
Thermal line dot printing
Paper width: 57.5±0.5mm
Printing density: 8dot/mm, 384dot/line
Printing speed: 50mm/s or 20line/s
Printing width: 48mm
Feeding speed: 50mm/s or 20line/s
Power: DC 5V , 3A
Фиг. 11 Printer control panel
1. Printout
2. Paper roll compartment
3. Select (Sel)
4. Line Feed (LF)
5. Cover opening button
5
4
2
3
1