KERN & SOHN VFB 2T-3 - Manual (Page 31)

31 VFB-BA-e-1310
8.7 Automatic adding-up
This function is used to issue and add individual weighing values automatically to the
summation memory on unloading of weighing scale without pressing .
Menu settings:
 „ “
The indicator „
AUTO
“
will appear.
Add up:
 Charge the system with the load which shall be added
After a successful standstill control you will hear an audio sound.
 Unload the weighing good, the weighing value is added into the summation
memory. „ACC 1“ will be displayed shortly, then the balance changes into the
weighing mode
than the balance changes into the weighing mode.
„M+“ will be displayed.
More weighed goods can o
nly be added when the display ≤ zero.
 Charge with the second load.
After the standstill control sounds a signal tone. Unload the weighing good, the
weighing value is added into the summation memory. Number of weighing,
followed by the total weight will be displayed for 2 sec.

(example)
 Add more weighed goods as described before.
Please note that the weighing system must be unloaded between the individual
weighing procedures.